How to set the Visionnet 200ES modem as a bridge
1. Browse into the modem interface (10.0.0.2)
2. Enter the username and password, click OK
3. Under Configuration, click on the WAN link
4. Set the VCI to the appropriate setting (UE=33 Paradyne=35)
5. Set the encapsulation to RFC 1483 Bridged IP LLC
6. Enable the Bridge
7. Click on the Submit or Execute button at the bottom of the page
8. Under Configuration, click Save Settings
9. Click the Submit button to flash the settings to memory and restart the modem.