How to set the 200ES Visionnet modem for a static IP address
1. Browse into the modem interface (10.0.0.2)
2. Enter the username and password
3. Under Configuration, click on the WAN link
4. Set the VCI to the appropriate setting (UE=33 Paradyne=35)
5. Enter the static IP address and subnet mask
6. Set the encapsulation to RFC 1483 Bridged IP LLC
7. Enable the bridge
8. Click on the Execute button at the bottom of the page
9. Under Configuration, click the DNS link
10.Enter the Default Gateway, Preferred DNS, and Alternate DNS
11.Click on the Submit button at the bottom of the page
12. Under Admin Privilege, click on Misc Configuration
13. Enable PPP reconnect on WAN access
14. Click the Submit button
15. Under Configuration, click Save Settings
16. Click Submit to write the settings to flash and reboot the modem