How to set the Visionnet 200ES modem for PPPoE connection
1. Browse into the modem interface (10.0.0.2)
2. Enter the username and password
3. Under Configuration, click on the WAN link
4. Set the VCI to the appropriate setting (UE=33 Paradyne=35)
5. Set the encapsulation to PPPoE LLC
6. Enter the PPPoE username and password. (Append a lowercase "p" to the end of the username)
7. Check the Automatic Reconnect check box
8. Click on the Submit or Execute button
9. Under Configuration, click on the DNS link
10. Enter the Preferred DNS address and the Alternate DNS address
11. Click on the Submit button
12. Under Admin Privilege, click on Misc Configuration
13. Enable PPP Reconnect on WAN Access
14. Click on the Submit button
15. Under Configuration, click Save Settings
16. Click Submit to write settings to flash and reboot the modem