How to Remove and Reinstall Dial-Up Networking and TCP/IP Files

MORE INFORMATION

To remove and reinstall Dial-Up Networking and TCP/IP, use the following steps:

NOTE: You should have your original Windows CD-ROM or disks available before beginning these steps. Also, if the Rna.inf file is not re-extracted correctly, the option to reinstall DUN is not available in Windows Setup. Because of this, you must re-extract the Rna.inf file to the INF folder.

1. Record the configuration information for each connection in the Dial-Up Networking folder. To do so, use the following steps:
   1. Double-click My Computer, and then double-click Dial-Up Networking.
   2. Right-click a connection, click Properties, and then record all of the settings including the TCP/IP information. Repeat this process with another connection until you have recorded all of your connection's configuration information.
2. If the Dial-Up Networking 1.2 or 1.3 Update is installed, uninstall it. If it is not installed, continue to the next step. To uninstall the Dial-Up Networking 1.2 or 1.3 Update, use the following steps:
   1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Programs.
   2. On the Install/Uninstall tab, click Dial-Up Networking Upgrade 1.2 (or 1.3), and then click Add/Remove.
   3. When you are prompted to remove the update, click Yes, and then click OK.
3. Delete all of your connections from the Dial-Up Networking folder. To do so, right-click a connection, and then click Delete. Repeat this process with another connection until you have deleted all of your connections, and then close the Dial-Up Networking folder.
4. In Network properties, record each component and its configuration information:
   1. Click Start, point to Settings, click Control Panel, and then double-click Network.
   2. Click a component on the Configuration tab, click Properties, and then record all of the component's settings. Repeat this process with another component until you have recorded all of your component's configuration information.

   NOTE: Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.
   
    

5. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Remove all of the network components from Network properties. To do so, click a component on the Configuration tab, and then click Remove. Repeat this process until you have deleted all of the network components from Network properties, click OK, and then click Yes when you are prompted to restart your computer.
6. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Uninstall Dial-Up Networking. To do so, follow these steps:
   1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Programs.
   2. Click the Windows Setup tab, click Communications (the word Communications, not the checkbox), click Details, and then click the Dial-Up Networking check box to clear it.
   3. Click OK, click Apply, click OK, and then click Yes when you are prompted to restart your computer.
7. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Restart your computer to a command prompt. To do so, click Start, click Shut Down, click Restart, and then click OK. Press F8 for Windows 95 (or CTRL key for Windows 98), choose Command Prompt Only, and then press ENTER.
8. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.At the command prompt, type the following commands, pressing ENTER after each command:NOTE: You can create a batch (.bat) file by copying and pasting all of the following commands into Notepad, saving it as "tcp.bat" (for example ) and then run this file at the command prompt to help automate this step.

   cd\windows
   ren winsock.dll winsock.old
   cd\windows\system
   ren rnaapp.exe rnaapp.eex
   ren splitter.vxd splitter.dxv
   ren vgateway.vxd vgateway.dxv
   ren pppmac.vxd pppmac.dxv
   ren wsock.vxd wsock.dxv
   ren spap.vxd spap.dxv
   ren rnasetup.dll rnasetup.lld
   ren rnathunk.dll rnathunk.lld
   ren rasapi16.dll rasapi16.lld
   ren rasapi32.dll rasapi32.lld
   ren smmscrpt.dll smmscrpt.lld
   ren smmsetup.dll smmsetup.lld
   ren rnaserv.dll rnaserv.lld
   ren wsock32.dll wsock32.lld
   ren rnaui.dll rnaui.lld
   ren rnanp.dll rnanp.lld
   ren rnaph.dll rnaph.lld
   ren vdhcp.386 vdhcp.683
   ren vnbt.386 vnbt.683
   ren vtcp.386 vtcp.683
   ren vtdi.386 vtdi.683
   ren vudp.386 vudp.683
   ren vip.386 vip.683
   cd\
   cd progra~1\access~1
   ren slipmenu.scp slipmenu.old
   ren slip.scp slip.old
   cd\
   cd windows\inf
   ren netcli.inf netcli.fni
   ren netservr.inf netservr.fni
   ren net.inf net.fni
   ren nettrans.inf nettrans.fni
   ren netppp.inf netppp.fni
   ren rna.inf rna.fni
   ren drvdata.bin drvdata.old
   ren drvidx.bin drvidx.old
    

   
   
   For Windows 98 only, include the renaming of these additional Winsock2 files:

   cd\windows\system
   ren msafd.dll msafd.lld
   ren mswsock.dll mswsock.lld
   ren mswsosp.dll mswsosp.lld
   ren ws2help.dll ws2help.lld
   ren ws2thk.dll ws2thk.lld
   ren rnr20.dll rnr20.lld
   ren ws2_32.dll ws2_32.lld
   ren wsasrv.exe wsasrv.eex
   ren afvxd.vxd afvxd.dxv
   ren ndis.vxd ndis.dxv
   ren wshtcp.vxd wshtcp.dxv
   ren wsipx.vxd wsipx.dxv
   ren wsock2.vxd wsock2.dxv
    

   NOTE: Some of these files may not be present.
   
    

9. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Restart your computer to a command prompt, and then extract the files in the following table from your original Windows disks or CD-ROM to the following folders.

   File	Folder
   Rasapi32.dll	Windows\System
   Wsock32.dll	Windows\System
   Rnasetup.dll	Windows\System
   Netcli.inf	Windows\Inf
   Netservr.inf	Windows\Inf
   Net.inf	Windows\Inf
   Nettrans.inf	Windows\Inf
   Netppp.inf	Windows\Inf
   Rna.inf	Windows\Inf
   Winsock.dll	Windows

   For information about how to extract a file, see the following article in the Microsoft Knowledge Base:

   129605 How to Extract Original Compressed Windows Files

   For information about which cabinet files contain the files you want to extract, please see the following articles in the Microsoft Knowledge Base:

   135540 Windows 95 CD-ROM Directory Listing (1 of 5)

   135537 Windows 95 CD-ROM Directory Listing (2 of 5)

   135538 Windows 95 CD-ROM Directory Listing (3 of 5)

   135539 Windows 95 CD-ROM Directory Listing (4 of 5)

   135541 Windows 95 CD-ROM Directory Listing (5 of 5)

   188428 Windows 98 CD-ROM Directory Listing (1 of 14)

   188429 Windows 98 CD-ROM Directory Listing (2 of 14)

   188430 Windows 98 CD-ROM Directory Listing (3 of 14)

   188431 Windows 98 CD-ROM Directory Listing (4 of 14)

   188432 Windows 98 CD-ROM Directory Listing (5 of 14)

   188433 Windows 98 CD-ROM Directory Listing (6 of 14)

   188434 Windows 98 CD-ROM Directory Listing (7 of 14)

   188435 Windows 98 CD-ROM Directory Listing (8 of 14)

   188436 Windows 98 CD-ROM Directory Listing (9 of 14)

   188437 Windows 98 CD-ROM Directory Listing (10 of 14)

   188438 Windows 98 CD-ROM Directory Listing (11 of 14)

   188439 Windows 98 CD-ROM Directory Listing (12 of 14)

   188440 Windows 98 CD-ROM Directory Listing (13 of 14)

   189503 Windows 98 CD-ROM Directory Listing (14 of 14)

   238664 Windows 98 Second Edition CD-ROM Directory Listing (1 of 14)

   238666 Windows 98 Second Edition CD-ROM Directory Listing (2 of 14)

   238668 Windows 98 Second Edition CD-ROM Directory Listing (3 of 14)

   238728 Windows 98 Second Edition CD-ROM Directory Listing (4 of 14)

   238729 Windows 98 Second Edition CD-ROM Directory Listing (5 of 14)

   238730 Windows 98 Second Edition CD-ROM Directory Listing (6 of 14)

   238749 Windows 98 Second Edition CD-ROM Directory Listing (7 of 14)

   238767 Windows 98 Second Edition CD-ROM Directory Listing (8 of 14)

   238771 Windows 98 Second Edition CD-ROM Directory Listing (9 of 14)

   238775 Windows 98 Second Edition CD-ROM Directory Listing (10 of 14)

   238809 Windows 98 Second Edition CD-ROM Directory Listing (11 of 14)

   238811 Windows 98 Second Edition CD-ROM Directory Listing (12 of 14)

   238813 Windows 98 Second Edition CD-ROM Directory Listing (13 of 14)

   239011 Windows 98 Second Edition CD-ROM Directory Listing (14 of 14)

   
   NOTE: The following table displays the location of several files.

      +-------------------------------+--------------------------------------
      | File Name    | Folder         | File Location                       |
      +-------------------------------+--------------------------------------
      | Rasapi32.dll | Windows\System | In the standard cab files           |
      +-------------------------------+--------------------------------------
      | Wsock32.dll  | Windows\System | precopy1.cab                        |
      +-------------------------------+--------------------------------------
      | Rnasetup.dll | Windows\System | precopy1.cab                        |
      +-------------------------------+--------------------------------------
      | Netcli.inf   | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Netservr.inf | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Net.inf      | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Nettrans.inf | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Netppp.inf   | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Rna.inf      | Windows\Inf    | precopy2.cab                        |
      +-------------------------------+--------------------------------------
      | Winsock.dll  | Windows        | precopy1.cab                        |
      +-------------------------------+--------------------------------------

   Standard cab files in Windows 95 are in the Win95_10.cab file. In Windows 95 OSR2 the location is the Win95_16.cab file. In Windows 98 the location is the Win98_37.cab file, and in Windows 98 Second Edition it is the Win98_40.cab file. Note that these files are in the actual .cab files of the operating system as opposed to the precopy .cab files.
   
    

10. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Restart your computer.
11. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Reinstall Dial-Up Networking. To do so, use the following steps:
    1. Click Start, point to Settings, click Control Panel, and then double-click Add/Remove Programs.
    2. On the Windows Setup tab, click Communications (the word Communications, not the check box), click Details, and then click to select the Dial-Up Networking check box.
    3. Click OK, click Apply, click OK, and then click Yes when you are prompted to restart your computer.NOTE: You may receive version conflict error messages during this process. If this happens, click Yes when you are prompted to keep a newer version of the Secur32.dll and Rpc*.dll files. Click No for all other files.
       
        
12. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Reinstall and configure the network components (listed in step 5). To do so, use the following steps:
    1. If you have a network adapter installed, install the software for the adapter according to the manufacturer's instructions.
    2. Click Start, point to Settings, click Control Panel, and then double-click Network.
    3. On the Configuration tab, click Add, click Adapter, click Add, click Microsoft in the Manufacturers box, click Dial-Up Adapter, and then click OK.
    4. Click Protocol, click Add, click Microsoft in the Manufacturers box, click TCP/IP, and then click OK.NOTE: You may receive version conflict error messages during this process. If this happens, click No when you are prompted to keep a newer version of each file.
       
        
    5. : You may receive version conflict error messages during this process. If this happens, click No when you are prompted to keep a newer version of each file.If needed, add a network client. To do so, click Client, click Add, click the appropriate manufacturer, click the client you want to install, and then click OK.NOTE: You may need to reconfigure the network components that have been reinstalled. To do so, click the network component, click Properties, add any appropriate settings, and then click OK. If needed, refer to the configuration information you recorded in step 4.
       
        
13. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Restart your computer.
14. : Make sure that you have the required disks to reinstall any third-party items before you remove them in Network properties.Re-create your Dial-Up Networking connections. To do so, use the following steps:
    1. Double-click My Computer, double-click Dial-Up Networking, and then follow the instructions on the screen in the Make New Connection Wizard.
    2. Right-click the connection that you created, click Properties, and then verify that the settings are the same as the configuration information you recorded in step 2. Repeat steps a and b until you have re-created all of your Dial-Up Networking connections.

NOTE: If after you perform the steps listed in this article you receive the following error message:
 

Refer to the following article in the Microsoft Knowledge Base to resolve the issue:

174579 Error Message: Error 745: An Essential File Is Missing

NOTE: The Arabic and Hebrew localized versions of the Dial-Up Networking 1.3 update cannot be uninstalled from Windows 95. For additional information about how to determine which folder Windows is installed in, click the article number below to view the article in the Microsoft Knowledge Base:

305792 How to Determine Which Folder Windows Is Installed In